Defence
CISTECH deliver ICON/WAVE system to Headquarters Joint Operations Command enabling communications to defence mobile assets around the world.
The system provides a multitude of Consoles throughout the facility support many roles and capabilities.
Custom Cipher Console
Platform
The software can run on a standard Intel platform (Windows XP SP2/Windows 2000 .Net Framework).
Multiple Role Selection
The console application allows an operator to select multiple roles allowing amalgamation of roles during low traffic periods.
Orphan Channel Tracking
The console network tracks and displays monitored and unmonitored channels on the system. This is available to every operator.
Automatic Field Location Tracking
If a field radio moves from one radio location to another, the network will automatically append the new location to all consoles on the network as soon as a selcall is sent from the new location.
Emergency (PAN PAN)
An emergency call can be triggered by either a destination selcall ID and/or a status bit. The emergency call provides a unique audible and visual indication.
Call Logging
Each call is logged with the time of arrival, answered time and the operator position that answered the call.
Operation Sustainability
Once a client has received its configuration from the server, the client can continue to operate even if the server is subsequently taken off line.
Redundancy
Multiple 'live' servers can operate simultaneously providing permanent available backup in case of system failure. When a configuration change is made by a console, all servers append the change.
TSoIP End Point Device (EPD)
The TSoIP EPD receives the data stream at the very edge of the network and translates it into a selcall tone sequence to be transmitted over the radio network.
The system removes the need for wide band trunks to send selcall tones across a network.
Current Supported Selcall Standards
Audible
EEA, CCIR, EIA, ZVEI1 & ZVEI2.
Sub-Audible
CTCSS
TSoIP EPD Overview
Multicast Networking
The TSoIP EPD operates in multicast mode enabling multiple consoles to monitor the same channel from anywhere in the IP network.
Each module has a unique ID allowing selection and logging of each channel individually.
Tone Acknowledgement
The system provides an acknowledge tone to field radio's after the selcall data stream has been received by a console. This provides assurance to the field user that a console operator has received their call.
Selcall Datastream Resend
Once the TSoIP module has decoded the selcall tone sequence and sent it into the IP network, it waits a predetermined time for an "acknowledge" packet from a console before resending the packet.
Remote Configurable
The SoIP module has a password protected Web Configuration page for network and radio configurations. See Table 1.
Configurable Parameters
Network Radio
SoIP IP Address
Subnet Mask
Default Gateway
TX Multicast IP Address
RX Multicast IP Address
NTP IP Address
SNMP Server IP Address
SNMP Community String
SoIP Unique ID
Date/Time Selcall Standard
Tone Sequence
Tones Duration
Gap Duration
Preamble Duration
Postamble Duration
Audio Transmit Level
ACK Tone Duration*
ACK Tone Frequency*
Tone Tolerance**
Table 1 - Configurable Parameters
* ACK = Acknowledgement tone sent to field user.
** Percentage tone tolerance on receive tone duration.
Specifications
Mechanical
Input Voltage Range: 7.5 - 32 VDC
Operation Temperature: Standard Version (0 ~ 50 C°) Hardened Version (-20 ~ + 85 C°)
Dimension: 125 x 80 x 45 mm
Weight: 0.300 kg
Finish: Anodized Black
Input/Output
1 x Ethernet 10/100: RJ45 Connector
1 x Async COM Port: DB9 Connector
1 x E&M to Router (600 Ohm): RJ45 Connector
1 x E&M to Radio (600 Ohm): RJ45 Connector |
